Publications       




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Publications

Journal Papers

   

1.

Uzal A., F.O. Sonmez, F.E. Oz, N. Ersoy ve K. Cinar, A composite sandwich plate with a novel core design, Composite Structures, 2018, 193: 198-211.

2.

Sonmez F.O., Optimum design of composite structures: A literature survey (1969-2009), Journal of Reinforced Plastics and Composites, 2017, 36(1): 3–39.

3.

Koc M., F.O. Sonmez, N. Ersoy ve K. Cinar. Failure behavior of composite laminates under four-point bending, Journal of Composite Materials, 2016, 50(26): 3679–3697.

4.

Ozturk M., S. Kocaoglan ve F.O. Sonmez, Concurrent design and process optimization of forging, Computers & Structures, 2016, 167: 24–36

5.

Tanlak N., F.O. Sonmez, and M. Senaltun  Shape optimization of bumper beams under high-velocity impact loads, Engineering Structures, 2015, 95: 49-60

6.

Balta B., F.O. Sönmez ve A. Cengiz,  Experimental identification of torque losses in V-ribbed belt drives using response surface method, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2015a, 229(8): 1070-1082.

7.

Balta B., F.O. Sönmez and A. Cengiz, Speed Losses in V-ribbed belt drives, Mechanism and Machine Theory, 2015b, 86: 1–14.

8.

Tanlak N. and F.O. Sonmez, Optimal shape design of thin-walled tubes under high-velocity axial impact loadsThin-Walled Structures, 2014, 84: 302–312.

9.

Ertas A.H. and  F.O. Sonmez, Design optimization of fiber - reinforced laminates for maximum fatigue life, Journal of Composite Materials, 2014, 48(20): 2493-2503.  

10.

Kayikci R. and F.O. Sonmez, Design of composite laminates for optimum frequency response, Journal of Sound and Vibration, 2012, 331(8): 1759–1776.

11.

Akbulut M. and F.O. Sonmez, Design optimization of laminated composites using a new variant of simulated annealing, Computers and Structures, 2011, 89, 1712–1724.

12.

Tanlak N. and F.O. Sonmez, E. Talay, Detailed and simplified models of bolted joints under impact loading, The Journal of Strain Analysis for Engineering Design, 2011, 46(3): 213-225. 

13.

Ertas A.H. and F.O. Sonmez, Design optimization of spot-welded plates for maximum fatigue life, Finite Elements in Analysis and Design, 2011(a), 47(4): 413-423.

14.

Ertas A.H. and F.O. Sonmez, Design optimization of composite structures for maximum strength using direct simulated annealing, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 2011(b), 225(1): 28-39.

15.

Sonmez F.O., Optimal shape design of shoulder fillets for flat and round bars under various loadings, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 2009, 223(C8): 1741-1754.

16.

Ertas A.H. and F.O. Sonmez, Optimization of spot-weld joints, Proc. IMechE, Part C: Journal of Mechanical Engineering Science,  2009(a), 223(C3): 545-555.

17.

Tumer H. and F.O. Sonmez, Optimum shape design of die and preform for improved hardness distribution in cold forged parts, Journal of Materials Processing Technology, 2009, 209(3):1538-1549.

18.

Ertas A.H., O. Vardar, F.O. Sonmez, and Z. Solim, Measurement and assessment of fatigue life of spot-weld joints,” Transactions of ASME; Journal of Engineering Materials and Technology, 2009(b), 131(1):011011.

19.

Akbulut M. and F.O. Sonmez, Optimum design of composite laminates for minimum thickness,” Computers & Structures, 2008, 86: 1974–1982.

 20.

 

Ertas A.H. and F.O. Sonmez, A parametric study on fatigue strength of spot-weld joints, Fatigue & Fracture of Engineering Materials & Structures, 2008, 31(9): 766–776.

21.

 

Sonmez F.O. and M. Akbulut, Process optimization of tape placement for thermoplastic compositesComposites Part A-Applied Science and Manufacturing, 2007, 38: 2013-2023.

22.

 

Sonmez F.O. and A. Demir, Analytical relations between hardness and strain for cold formed parts, Journal of Materials Processing Technology, 2007, 186: 163-173.

23.

 

Sonmez F.O., Shape optimization of 2D structures using simulated annealing, Computer Methods in Applied Mechanics and Engineering, 2007, 196: 3279-3299.

24.

 

Erdal O. and F.O. Sonmez, Optimum design of composite laminates for maximum buckling load capacity using simulated annealing, Composite Structures, 2005, 71: 45-52.

25.

 

Demir A., F.O. Sonmez, Prediction of Brinell hardness distribution in cold-formed parts, Transactions of ASME; Journal of Engineering Materials Technology, 2004, 126(4): 398-405.

26.

Sonmez F.O., H.T. Hahn, M. Akbulut, Analysis of process-induced residual stresses in tape placement, Journal of Thermoplastic Composite Materials, 2002, 15(6): 525-544.

27.

Colak Z.S, F.O. Sonmez, V. Kalenderoglu, Process modeling and optimization of resistance welding for thermoplastic composites,” Journal of Composite Materials, 2002, 36(6): 721-744.

28.

Sonmez F.O., E. Eyol, Optimal post-manufacturing cooling paths for thermoplastic composites, Composites Part A-Applied Science and Manufacturing, March 2002, 33(3): 301-314.

29.

 

Sonmez F.O. and H.T. Hahn, Thermomechanical analysis of the laminated object manufacturing (LOM) process, Rapid Prototyping Journal, January 1998, 4(1): 26-36.

30.

Sonmez F.O. and H.T. Hahn, Analysis of the on-Line consolidation process in thermoplastic composite tape placement, Journal of Thermoplastic Composite Materials, 1997a, 10(6): 543-572.

31.

Sonmez F.O. and H.T. Hahn, Thermoviscoelastic analysis of the thermoplastic composite tape placement process, Journal of Thermoplastic Composite Materials, 1997b, 10(4): 381-414.

32.

 

Sonmez F.O. and H.T. Hahn, Modeling of heat transfer and crystallization in thermoplastic composite tape placement process, Journal of Thermoplastic Composite Materials, 1997c, 10(3): 198-240.

   
   

 

Book Chapters

1.

Sonmez, F.O., Structural Optimization Using Simulated Annealing, Simulated Annealing, I-Tech Education and Publishing, Editor: Cher Ming Tan, Vienna, 2008, pp. 281-306.

   

 

International Conference Proceedings

1.

Yalkilic C., F.O. Sonmez, F.E. Oz, N. Ersoy, Shape optimization of a sandwich plate with a novel core design, ICSS-12, 12th International Conference on Sandwich Structures, Lausanne, Switzerland, 19–22 August 2018.

2.

Balta B., F.O. Sonmez, A. Cengiz, B. Balta, Belt speed losses in transmission systems – modeling and measurement, 9th International Automotive Technologies Congress, OTEKON 2018, Bursa, 7-8 May 2018.

3.

Yalkilic C., F.O. Sonmez, N. Ersoy, Optimum Design of a sandwich plate with a new core design, ICCS20 20th International Conference on Composite Structures, Paris, France, 4-7 September 2017.

4.

Uzal A., F.O. Sonmez, N. Ersoy, and K. Cinar, An undulated sandwich plate with a new core, ECCM17 - 17th European Conference on Composite Materials Munich, Germany, 26-30 June 2016.

5.

Alpay Y.O., F.O. Sonmez, N. Ersoy, K. Cinar, F.E. Oz, Failure behavior of laminated composite plates under anticlastic bending, ICCM20 - 20th International Conference on Composite Materials, Copenhagen, July 19-24 2015.

6.

Koc M., F.O. Sonmez, N. Ersoy, and K. Cinar, Failure prediction capabilities of composite failure criteria under out-of-plane loads, ECCM16 - 16th European Conference on Composite Materials, Seville, Spain, 22-26 June, 2014.

7.

Akbulut M., F.O. Sonmez, Investigation of progressive failure behavior of notched composite plates, ECCM16 - 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014.

8.

Balta B., B. Balta, A. Cengiz, F.O. Sonmez, and A. Arıcı, Torque loss measurements on poly V-ribbed belt drive systems ", ASME 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes, France,  2-4 July 2012.

9.

Koc M., F.O. Sonmez, and N. Ersoy, Failure behavior of composite laminates under out-of-plane loads, ECCM15 - 15th European Conference on Composite Materials, Venice, Italy, 24-28 June 2012.

10.

Tanlak N., F.O. Sonmez, and M. Senaltun, Shape optimization of beams under transverse crash, Proceedings of 15th International Conference on Machine Design and Production, Pamukkale, Turkiye, 19-22 June 2012.

11.

Balta, B., F.O. Sonmez, and A. Cengiz, Gage repeatability and reproducibility investigations of a test rig using ANOVA/Xbar-R method, ASME International Mechanical Engineering Congress and Exposition, 11-17 November 2011, 3: 793-800.

12.

Ertas, A.H. and F.O. Sonmez, Design of fiber reinforced laminates for maximum fatigue life, Proceedings of 10th International Fatigue Conference, Prague, Czech Republic, 6-11 June 2010, 2(1), pp. 251-256.

13.

Ozturk M. and F.O. Sonmez, Optimization of forging processes with a concurrent approach, Proceedings of 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kusadasi, Turkiye, 18-21 June 2009, pp. 129-138.

14.

Ertas A.H. and F.O. Sonmez, A parametric study on fatigue life behavior of spot welded joints,” Proceedings of 8th International Fracture Conference,7-9 November 2007, Istanbul, Turkiye, pp. 498-508.

15.

Tumer H. and F.O. Sonmez, Optimum shape design of die and preform for improved hardness distribution in cold forged parts, Proceedings of 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Cesme, Turkiye, 21-23 June 2007, pp. 305-314.

16.

Sonmez F.O. and A. H. Ertas, Optimization of spot weld joints, Proceedings of 12th International Conference on Machine Design and Production, Kusadasi, Turkiye, 5-8 September, 2006, pp. 883-893.

17.

Sonmez F.O., Optimal shape design of shoulder filletsProceedings of 12th International Conference on Machine Design and Production, Kusadasi, Turkiye, 5-8 September, 2006, pp. 895-904.

18.

Sonmez F.O., Precision and accuracy in generating globally optimum shapes,”  Proceedings of the International Workshop on Global Optimization, Editors: I. Garcia, L.G. Casado, E.M.T. Hendrix, and B. Toth, San Jose, Spain, 2005, pp. 231-236.

19.

Gunduz N., N. Akbulut, and F.O. Sonmez, Generating optimal 2D structural designs using simulated annealing,” in Computer Aided Optimum Design of Structures VII, Editor: S. Hernandez and C.A. Brebbia, WIT Press, May 2001, pp. 347-356.

20.

Altinkopru H. and F.O. Sonmez, Shape optimization of 3D-shell structures using simulated annealing, in  Problems in Modern Applied Mathematics, Editor: N. Mastorakis, World Scientific and Engineering Society Press, July 2000, pp. 135-140.

21.

Sonmez F.O. and H.T. Hahn, Simulation of crystallization behavior during thermoplastic tape placement process, Proceedings of the Tenth International Conference on Composite Materials (ICCM), Whistler, Canada, III. 325-332, August 1995.

 

Others

1.

Sonmez, F.O, İki boyutlu parçaların optimum şekil tasarımı,” Proceedings of the VIII. Otomotiv ve Yan Sanayii Sempozyumu, Bursa, October 2003.

2.

Sonmez, F.O, Otomotiv sanayiinde kompozit malzeme kullanımı”, Mühendis ve Makina, Sayı: 464, sayfa: 39-40, October 1998.

3.

 

Duz, B., Ecder, A., and Sonmez, F.O., Coupled analysis of turbomachinery blades,” European Seminar on Coupled Problems (ESCO 2008), Jetrichovice, Czech Republic, June 8 -13, 2008.

 

Citations from Other Researchers (SCIE)

 
 

Publication

Number of Citations

 Sonmez (2017) 1
Koc et al. (2016) 4

Tanlak et al. (2015) 

10

Balta et al. (2015b)  10
Tanlak ve Sonmez (2014) 14

Ertas and Sonmez (2014)

4

Kayikci and Sonmez (2012)

6

Akbulut and Sonmez (2011)

17

Tanlak et al. (2011)

7

Ertas and Sonmez (2011a)

10

Ertas and Sonmez (2011b)

2

Ertas and Sonmez (2010)

4

Sonmez (2009)

6

Ertas and Sonmez (2009a)

4

Tumer and Sonmez (2009)

11

Ertas et al. (2009b)

9

Akbulut and Sonmez (2008)

22

Ertas and Sonmez (2008)

8

Sonmez (2008)

2

Sonmez and Akbulut (2007)

23

Sonmez and Demir (2007)

50

Sonmez (2007)

23

Erdal and Sonmez (2005)

59

Demir and Sonmez (2004)

3

Sonmez et al. (2002)

17
Colak et al. (2002) 12

Sonmez and Eyol (2002)

10

Gunduz, Akbulut and Sonmez (2001)

1

Sonmez and Hahn (1998)

22

Sonmez and Hahn (1997a)

38

Sonmez and Hahn (1997b)

8

Sonmez and Hahn (1997c)

41

Sonmez and Hahn (1995)

4

 

 Totally: 462

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

 

 

Education

Experience

Research Interests

Teaching

Home

 

 

Thesis Supervised

 

 

Publications